No-Bake Moulding Equipment In Supplier Chennai

Bajrang Engineering can design, manufacture and supply complete plants for preparing and handling no bake moulds. Such moulds could be either without flask (i.e cake moulds) or with flask.

For preparation of moulds the plant should essentially have a Continuous Mixer and Compaction Table. Sizing of the Mixer has a relationship with the size of the Mould to be prepared and the hourly production rate of the plant. Typically a no bake mould half should not take more than 20 minutes to be filled with sand mix. Based on this as well as number of moulds to be prepared per hour, the hourly capacity of the Mixer in TPH can be determined.

A typical Mould Handling system will have the following items of equipment

1) Rollver Machine - Equipment for stripping of mould halves from patterns
2) Upstream equipment of mould stripping equipment
3) Downstream equipment of mould stripping equipment
4) Equipment for handling of closed moulds and poured moulds
5) Sand Reclamation Unit

Rollover Machine is the equipment used for stripping of mould halves from patterns.

#No-Bake Moulding Equipment In Supplier Chennai